Recovery Systems
8,000 KG ULTRALOADER SLA

Full Specifications


Technical Specifications

 

Main Ultraloader Design and Construction

8000 KG CAPACITY BODY
  • This body capacity will depend on chassis type and overall GVW

Body is generally built on chassis from 7.5 tonnes to 10 tonnes

  • Hydraulically driven rack and demount system
DIMENSIONS
Body will be designed and constructed to suit to specific chassis wheel-base
  • Overall width of body can be constructed up to 2550mm
BEACON ARCH AND FRONT NUDGE BAR
This is mounted to front of body and enables installation of beacons, work lamps, stop/ tail/ indicator lights
  • Styled beacon flyer with radius corners
  • Mounting brackets for stop/tail/indicators
  • 1 pair of work lamps
  • 60” 4 rotator beacon light bar
ALL STEEL BODY

With fully welded steel treadplate flooring

  • Twin tilt body rams
  • Double acting hydraulic cylinders with 70mm bores
STAINLESS STEEL TOOL LOCKER  
  • 1 x 48"x20"x20" locker with draw fitted to near side of chassis (where possible)
  • Fitted with lockable stainless steel handle

 

BODY SIDE CAPPING
  • Stainless steel capping fitted to protect body paintwork and is finished with an anti-slip safety tape
VEHICLE SECURING

  • 12 deck mounted lashing tie down rings with full tongues

  • Set of 4 deluxe transporter tie down straps with soft restraining loops

90” WINCH BOBBINS

  • x8 bobbins
  • Enables side winching for the recovery and loading of badly damaged vehicles

Spectacle Lift 

2000 KG CAPACITY ( if required )
  • Gold zinc coated spectacle lift head
  • Fitted with flip over head for easy stowage when not in use
  • Spec beam is powered in and out with a manual safety lock and hydraulic check valve
  • Twin double acting hydraulic cylinders with 70mm bores and stainless steel rods
  • 1 pair of spectacle lift tie down ratchet straps
  • 1 pair of wheel space reducing bars are fitted to enable the transport of vehicles with small diameter wheels
  • 50mm tow ball
Electrical
  • Vision Alert 60" light bar
     
  • With 4 rotators
  • Illuminated centre

1 pair of flyer mounted work lamps and 1 pair of flyer mounted stop/tail/indicator lamps

  • Radio remote winch control
  • Tow ball & 7 pin plug
  • 24/12V dropper fitted to 7 pin plug

Hydraulic System

  • POWER TAKE OFF HYDRAULIC PUMP
  • Vehicle gearbox will be fitted with a hydraulic pump
  • Cab mounted PTO air switch with handbrake interlock or cable operated on certain vehicles
  • Chassis mounted hydraulic tank with in-built cartridge filter
5 Bank spool valve set up as follows
  • Winch control with electro/air hydraulic control
  • Slide body on/off
  • Tip body up/down (inc. auto tilt)
  • Spectacle lift up/down
Spec beam in/out manual safety lock
  • Fully enclosed stainless steel spool valve cover
10 000 lb HYDRAULIC WINCH
  • Fully compliant to new EN 14492-1 regulations
With radio remote and manual override lever
  • 3560kg line pull- Rated line pull of 34.9kN
  • Single stage planetary gearing, ideally suited to slidebed and spec lift applications
  • Short drum and long drum options -165mm or 248mm lengths
  • 100mm diameter drum with deep flanges. Extends rope life and assists wrapping
  • Heavy duty roller guide assemblywith greaseways and large diameter rollers
  • Spring loaded clutch- easy to use
  • Braking system spring applied, hydraulic release disc brake providing 100% braking

5 BANK SPOOL VALVE SET UP AS FOLLOWS:-

  • WINCH CONTROL WITH ELECTRO/AIR HYDRAULIC CONTROL
  • POWER BODY ON-OFF
  • TIP BODY UP-DOWN (INCLUDING AUTO TILT)
  • SPEC UP / DOWN
  • SPEC IN / OUT
Finishing
  • Primed and painted in 2 pack
  • Under body wax-oiled