Recovery Systems
5000 KG SLIDE BODY / 1500 KG SPEC

Full Specifications

Main Slide Body Design and Construction

5000 KG CAPACITY BODY
  • This body capacity will depend on chassis type and overall GVW
  • Body is generally built on chassis from 7.5 tonnes to 17 tonnes
DIMENSIONS
  • Body will be designed and constructed to suit to specific chassis wheel-base
  • Overall width of body can be constructed up to 2550mm
BEACON ARCH AND FRONT NUDGE BAR
  • This is mounted to front of body and enables installation of beacons, work lamps, stop/ tail/ indicator lights
  • Styled beacon flyer with radius corners
  • Mounting brackets for stop/tail/indicators
  • 1 pair of work lamps
  • 60” 4 rotator beacon light bar
ALL STEEL BODY

  • With fully welded steel treadplate flooring

  • Twin tilt body rams

  • Double acting hydraulic cylinders with 70mm bores

  • 12ft slide off ram

STAINLESS STEEL TOOL LOCKER
  • 48”x20”x20” fitted to near-side of chassis (where possible)
  • Fitted with lockable stainless steel handle
BODY SIDE CAPPING
  • Stainless steel capping fitted to protect body paintwork and is finished with an anti-slip safety tape
VEHICLE SECURING
  • 12 deck mounted lashing tie down rings
  •  Set of 4 deluxe transporter tie down straps with soft restraining loops
90” WINCH BOBBINS
  • Enables side winching for the recovery and loading of badly damaged vehicles
Spectacle Lift
1500 KG CAPACITY
  • Gold zinc coated spectacle lift head
  • Fitted with flip over head for easy stowage when not in use
  • Spec beam is powered in and out with a manual safety lock in the open and closed position
  • Twin double acting hydraulic cylinders with 70mm bores
  • 1 pair of spectacle lift tie down ratchet straps
  • 1 pair of wheel space reducing bars are fitted to enable the transport of vehicles with small diameter wheels
  • 50mm tow ball

Hydraulic System

POWER TAKE OFF HYDRAULIC PUMP
  • Vehicle gearbox will be fitted with a hydraulic pump
  • Cab mounted PTO air switch with handbrake interlock
  • Chassis mounted hydraulic tank with in-built cartridge filter
5 BANK SPOOL VALVE SET UP AS FOLLOWS
  • Winch control with electro/air hydraulic control
  • Slide body on/off
  • Tip body up/down (inc. auto tilt)
  • Spectacle lift up/down
  • Spec beam in/out manual safety lock
  • Fully enclosed stainless steel spool valve cover
8000 lb HYDRAULIC WINCH
  • Fully compliant to new EN 14492-1 regulations
  • With radio remote and manual override lever
  • 3560kg line pull- Rated line pull of 34.9kN
  • Single stage planetary gearing, ideally suited to slidebed and spec lift applications
  • Short drum and long drum options -165mm or 248mm lengths
  • 100mm diameter drum with deep flanges. Extends rope life and assists wrapping
  • Heavy duty roller guide assembly with greaseways and large diameter rollers
  • Spring loaded clutch- easy to use
  • Braking system Spring applied, hydraulic release disc brake providing 100% braking
Electrical
VISION ALERT 60” LIGHT BAR
  • With 4 rotators
  • Illuminated centre
  • 1 pair of flyer mounted work lamps and1 pair of flyer mounted stop/tail/indicator lamps
  • Radio remote winch control
  • Tow ball & 7 pin plug
  • 24/12V dropper fitted to 7 pin plug
Finishing
  • Primed and painted in 2 pack
  • Under body wax-oiled